Vine Linux バグトラッキングシステム - Vine Linux
課題の詳細を表示
0001175Vine Linux1 バグ公開2011-07-26 15:292011-08-06 00:16
anonymous 
 
不明 
完了不明 
6.0 
 
x86
不明
0001175: インストール時のエラー
diskboot.imgでUSBメモリから起動し、
インストーラを立ち上げて順番に入力を
行いました。
インストールの種類は「全て」で行いました。
ネットワークの設定では、
192.168.14.38 / 255.255.0.0
を固定で割り当てるようにしました。
root以外のユーザ/パスワードを設定して「次へ」
をクリックしたところで、ダイアログにエラー
メッセージが出ます。

表示されるエラーは以下の通り

-----------------------------------------------------X8
Exception Occured

Traceback(most recent call last):
 File "/usr/lib/anaconda/gui.py", line 794, in textClicked
  self.dispatch.gotoNext()
 File "/usr/lib/anaconda/dispatch.py", line 171, in gotoNext
  self.moveStep()
 File "/usr/lib/anaconda/dispatch.py", line 239, in moveStep
  rc = apply(func, self.bindArgs(args))
 File "/usr/lib/anaconda/packages.py", line 179, in readPackages
  hdlist = method.readHeaders()
 File "/usr/lib/anaconda/urlinstall.py", line 207, in readHeaders
  dl = socket.ntohl(info[3])
OverflowError: can't convert nagative number to unsigned long
-----------------------------------------------------X8

Knoppix 6.4.4ではCD-ROMから起動させることが可能なので、
インストール時のパーティションの状況付記させて
いただきました。
ここに示されている、/dev/sda6パーティションの部分を
一旦削除して、SWAPパーティションとルートパーティションの
2つを設定してインストールを進めました。

root@Microknoppix:~# fdisk /dev/sda
 
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').
 
Command (m for help): p
 
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2bc6a64e
 
   Device Boot Start End Blocks Id System
/dev/sda1 1 131 1048576 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 131 26240 209715200 7 HPFS/NTFS
/dev/sda3 26240 120166 754462720 5 Extended
/dev/sda4 120166 121602 11534336 12 Compaq diagnostics
/dev/sda5 26240 60148 272367616 7 HPFS/NTFS
/dev/sda6 60148 120166 482093056 83 Linux
 
Command (m for help): c
DOS Compatibility flag is not set
 
Command (m for help): u
Changing display/entry units to sectors
 
Command (m for help): p
 
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2bc6a64e
 
   Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 27 Unknown
/dev/sda2 * 2099200 421529599 209715200 7 HPFS/NTFS
/dev/sda3 421529600 1930455039 754462720 5 Extended
/dev/sda4 1930455040 1953523711 11534336 12 Compaq diagnostics
/dev/sda5 421531648 966266879 272367616 7 HPFS/NTFS
/dev/sda6 966268928 1930455039 482093056 83 Linux

エラーはネットワーク関連で起きているように
見えましたので、lspciで機器の構成を調べた結果を
添付します。

root@Microknoppix:~# lspci -v
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: agpgart-intel
 
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Fujitsu Limited. Device 163c
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [d0] Power Management version 2
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: i915
 
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller 0000001 (rev 04)
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at fe407000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
    Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
 
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller 0000002 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at fe406000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
 
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
    Subsystem: Fujitsu Limited. Device 14f0
    Flags: bus master, fast devsel, latency 0, IRQ 41
    Memory at fe400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [130] Root Complex Link
    Kernel driver in use: HDA Intel
 
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Fujitsu Limited. Device 162b
    Capabilities: [a0] Power Management version 2
 
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller 0000001 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at fe405000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
 
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) (prog-if 01 [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
    Capabilities: [50] Subsystem: Fujitsu Limited. Device 162b
 
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04)
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
 
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
    I/O ports at f110 [size=8]
    I/O ports at f100 [size=4]
    I/O ports at f0f0 [size=8]
    I/O ports at f0e0 [size=4]
    I/O ports at f0d0 [size=16]
    I/O ports at f0c0 [size=16]
    Capabilities: [70] Power Management version 3
    Capabilities: [b0] PCI Advanced Features
    Kernel driver in use: ata_piix
 
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
    Subsystem: Fujitsu Limited. Device 162b
    Flags: medium devsel, IRQ 18
    Memory at fe404000 (64-bit, non-prefetchable) [size=256]
    I/O ports at f040 [size=32]
    Kernel driver in use: i801_smbus
 
00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 04) (prog-if 85 [Master SecO PriO])
    Subsystem: Fujitsu Limited. Device 162b
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
    I/O ports at f0b0 [size=8]
    I/O ports at f0a0 [size=4]
    I/O ports at f090 [size=8]
    I/O ports at f080 [size=4]
    I/O ports at f070 [size=16]
    I/O ports at f060 [size=16]
    Capabilities: [70] Power Management version 3
    Capabilities: [b0] PCI Advanced Features
    Kernel driver in use: ata_piix
 
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Fujitsu Limited. Device 15b1
    Flags: bus master, fast devsel, latency 0, IRQ 40
    I/O ports at e000 [size=256]
    Memory at e0004000 (64-bit, prefetchable) [size=4K]
    Memory at e0000000 (64-bit, prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 01
    Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
    Capabilities: [d0] Vital Product Data
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel
    Capabilities: [160] Device Serial Number 04-00-00-00-68-4c-e0-00
    Kernel driver in use: r8169

よろしくお願いいたします。
設定されていません。
課題の履歴
2011-07-26 15:29anonymous新規課題
2011-07-28 17:49anonymousコメント追加: 0000567
2011-08-06 00:16kazutaka状態新規 => 完了
2011-08-06 00:16kazutakaコメント追加: 0000568

コメント
(0000567)
anonymous   
2011-07-28 17:49   
今日、RC2のDVD/USBイメージからインストールを行ったところ、
インストールができ、問題なく動作しています。
インストールの際に「パーティション情報がリカーシブになって
いる」という「警告」が出ましたが「無視」してインストールを
続けて「とりあえず」うまくいった状態です。
前回は、β2、RC1でのFTPインストールでうまく行かなかったの
ですが、この警告と関係があったのかと思っています。
ちなみに今回はx86_64もOKでした。
書き忘れていましたが、PCの機種は富士通ESPRIMO D581/Cです。
第二世代のCore i5ですが、動作してくれてうれしいです。
お騒がせいたしました。
(0000568)
kazutaka   
2011-08-06 00:16   
報告報告ありがとうございます。

ひとまずインストールできるようですので、これで完了に
しておきます。

ハラダ