Linux version 2.6.16-0vl52 (daisuke@windy.local.dicey.org) (gcc version 3.3.6 release (Vine Linux 3.3.6-0vl7)) #1 Fri Oct 6 12:18:55 JST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
0MB HIGHMEM available.
256MB LOWMEM available.
On node 0 totalpages: 65536
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 61440 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI not present or invalid.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 20000000 (gap: 10000000:f0000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ resume2=swap:/dev/hda3 vga=0x314
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 166.686 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255456k/262144k available (2025k kernel code, 6084k reserved, 956k data, 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 333.95 BogoMIPS (lpj=667915)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 008001bf 008005bf 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 008001bf 008005bf 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008001bf 008005bf 00000000 00000000 00000000 00000000 00000000
CPU: AMD-K6tm w/ multimedia extensions stepping 02
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 113k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=0
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:04.0
PCI: Using ALI IRQ Router
PCI: Using IRQ router ALI [10b9/1533] at 0000:00:02.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1160839353.556:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0x12000000, mapped to 0xd0880000, using 2048k, total 2048k
vesafb: mode is 800x600x16, linelength=1600, pages=1
vesafb: protected mode interface info at c000:4797
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: Card 'D-Link DE-220 Ethernet Card'
isapnp: Card 'LT Win Modem'
isapnp: Card 'CS4237B'
isapnp: 3 Plug & Play cards detected total
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0b.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x7400-0x7407, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x7408-0x740f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: FUJITSU MPF3102AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: TEAC PD-1 PD-518E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=19857/16/63, (U)DMA
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdd: ATAPI 8X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbmon: debugfs is not available
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
Freeing unused kernel memory: 188k freed
Suspend2 2.2.5: Swapwriter: Signature found.
Suspend2 2.2.5: Resuming enabled.
input: PS/2 Generic Mouse as /class/input/input1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: setting IRQ 10 as level-triggered
PCI: Assigned IRQ 10 for device 0000:00:0d.0
ohci_hcd 0000:00:0d.0: OHCI Host Controller
ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0d.0: irq 10, io mem 0x13200000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input2
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:0d.0-2
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
lp: driver loaded but no devices found
Adding 522104k swap on /dev/hda3.  Priority:-1 extents:1 across:522104k
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
EXT3 FS on hda2, internal journal
encode_eucjp: module license 'unspecified' taints kernel.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Initialized config rom entry `ip1394'
powernow-k8: Processor cpuid 562 not supported
powernow: This module only works with AMD K7 CPUs
cpufreq: No nForce2 chipset.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (2048 buckets, 16384 max) - 232 bytes per conntrack
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
pnp: Device 00:01.00 activated.
ne.c: ISAPnP reports Generic PNP at i/o 0x220, irq 5.
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x220: 00 80 c8 1a 72 ef
eth%d: NE2000 found at 0x220, using IRQ 5.
eth0: no IPv6 routers present
ieee1394: Initialized config rom entry `ip1394'
ieee1394: Initialized config rom entry `ip1394'